Extreme Networks ExtremeWare Command Reference Manual page 1480

EAPS Commands
Hello Timer interval: 1 sec
Preforwarding Timer interval: 3 sec
Last update: From Master Id 00:01:30:B9:4B:E0, at Tue May 6 12:49:25 2003
Eaps Domain has following Controller Vlan:
Vlan Name
"rhsc"
EAPS Domain has following Protected Vlan(s):
Vlan Name
"traffic"
Number of Protected Vlans: 1
The following command displays EAPS information:
show eaps eaps2
The results for a transit node are shown as follows:
Name: "eaps2" (instance=1)
State: Link-Down
Enabled: Yes Mode: Transit
Primary port: 3
Secondary port: 2
Hello Timer interval: 1 sec
Preforwarding Timer interval: 6 sec
Last update: From Master Id 00:01:30:B9:4B:E0, at Tue May 6 12:49:25 2003
EAPS Domain has following Controller Vlan:
Vlan Name
"cv2"
Number of Protected Vlans: 2
The following command displays summary EAPS information:
show eaps summary
The results for this command are as follows:
EAPS Enabled: Yes
Number of EAPS instances: 1
EAPSD-Bridge links: 2
Domain State
------------ ------------ -- -- ------- -------
eaps1 Complete
History
This command was first available in ExtremeWare 6.2.
The option was added in ExtremeWare 6.2.2.
summary
This command was modified in ExtremeWare 7.1 to display primary and secondary ring-ports and
show the status of the failtimer.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
1480
Fail Timer interval: 3 sec
VID QosProfile
0020 QP8
VID
1001
[Running: Yes]
Port status: Down
Port status: Up
Fail Timer interval: 3 sec
VID QosProfile
4002 QP8
Pri Sec
Mo En Port Port
M Y 1 2
Tag status: Tagged
Tag status: Tagged
Vlan
Control-Vlan (VID)Count
-----------------------
cv1 (1001)
ExtremeWare 7.7 Command Reference Guide
1