Show Wireless Ports Interface Client Mac-Statistics - Extreme Networks ExtremeWare Command Reference Manual

show wireless ports interface client mac-statistics

show wireless ports [all | <portlist>] interface [1 | 2] client
<mac-address> mac-statistics
Description
Displays information about a client whose MAC address is selected from the client list.
Syntax Description
all
portlist
interface
mac-address
Default
N/A
Usage Guidelines
Use this command to review MAC statistic information for a client by MAC address.
Example
The following example displays MAC statistic information for port 1:8 on interface 1:
show wireless ports 1:8 interface 1 client 00:0D:54:98:AC:35 mac-statistics
The output of the command is similar to:
Intf
AP Mac Address
RSS:
Total PROBE REQ
Total AUTH REQ
Total ASSOC REQ
Total REASSOC REQ :
Total DEASSOC REQ :
Total DEAUTH REQ
Total PS POLL
Total Data Frames :
NAV Value
--------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------
ExtremeWare 7.7 Command Reference Guide
Specifies all active ports.
Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the
form 1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
Specifies an interface: 1 or 2.
Specifies the MAC address of the client network interface card.
: 1:8:1
: 00:0D:54:98:AC:35
Min : 0
Max : 0
Avg : 0
: 0
: 1
: 2
0
0
: 0
: 0
0
: 0
show wireless ports interface client mac-statistics
1403