Unconfigure Sys-Hardware-Recovery - Extreme Networks ExtremeWare Command Reference Manual

unconfigure sys-hardware-recovery

unconfigure sys-hardware-recovery
unconfigure sys-hardware-recovery
Description
Removes any previous hardware recovery mode and sets the system to the default value, which is log.
NOTE
This command is available only on the "i" series switches.
Syntax Description
This command has no arguments or variables.
Default
N/A
Usage Guidelines
This command removes a previously configured hardware recovery mechanism for systems with a
hung processor chip.
Example
The following command removes the configured system hardware recovery mechanism:
unconfigure sys-hardware-recovery
History
This command was first available in ExtremeWare 7.5.
Platform Availability
This command is available only on "i" series platforms.
ExtremeWare 7.7 Command Reference Guide 837