Extreme Networks ExtremeWare Command Reference Manual page 1479

Failtimer expiry action:
Preforwarding Timer interval:
1
Last update:
EAPS Domain has ... Controller
Vlans:
EAPS Domain has ... Protected
2
Vlans:
Number of Protected Vlans:
1. These fields apply only to transit nodes; they are not displayed for a master node.
2. This list is displayed when you use the detail keyword in the
Example
The following command displays detailed EAPS information for domain "eaps1":
show eaps eaps1 detail
The results for domain "eaps1" on a master node are shown as follows:
Name: "eaps1" (instance=0)
State: Complete
Enabled: Yes
Primary port: 10
Secondary port: 20
Hello Timer interval: 1 sec
Fail timer expiry action: Send alert
Last update: From Master Id 00:04:96:18:40:92, at Wed Jan 28 15:58:20 2004
EAPS Domain has following Controller Vlan:
Vlan Name
"cvlan"
EAPS Domain has following Protected Vlan(s):
Vlan Name
"pvlan"
Number of Protected Vlans: 1
The following command displays detailed EAPS information:
show eaps detail
The results for a transit node are shown as follows:
EAPS Enabled: Yes
Number of EAPS instances: 1
EAPSD-Bridge links: 2
Name: "eaps1" (instance=0)
State: Links-Up
Enabled: Yes
Primary port: 13
Secondary port: 14
ExtremeWare 7.7 Command Reference Guide
Displays the action taken when the failtimer expires:
• Send-alert—Sends a critical message to the syslog when the failtimer
expires.
• Open-secondary-port—Opens the secondary port when the failtimer expires.
Displays only for master nodes.
1 The configured value of the timer. This value is set internally by the EAPS
software.
Displayed only for transit nodes; indicates the last time the transit node
received a hello packet from the master node (identified by its MAC address).
Lists the assigned name and ID of the control VLAN.
Lists the assigned names and VLAN IDs of all the protected VLANs configured
on this EAPS domain.
The count of protected VLANs configured on this EAPS domain.
[Running: Yes]
Mode: Master
Port status: Up
Port status: Blocked
Fail Timer interval: 3 sec
VID
0100
VID
0200
[Running: Yes]
Mode: Transit
Port status: Up
Port status: Up
show eaps command.
Tag status: Tagged
Tag status: Tagged
QosProfile
QP8
QosProfile
QP1
Tag status: Tagged
Tag status: Tagged
show eaps
1479