Disable Sys-Hardware-Recovery Polling - Extreme Networks ExtremeWare Command Reference Manual
Version 7.7
Hide thumbs
Also See for ExtremeWare:
- Command reference manual (2546 pages) ,
- Command reference manual (2254 pages) ,
- Command reference manual (1598 pages)
Table of Contents
Advertisement
disable sys-hardware-recovery polling
disable sys-hardware-recovery polling
disable sys-hardware-recovery polling
Description
Configures the hardware recovery mechanism to work in a passive, non-polling mode.
NOTE
This command is available only on the "i" series switches.
Syntax Description
This command has no arguments or variables.
Default
The polling mechanism is disabled by default.
Usage Guidelines
N/A
Example
The following command configures a passive mode for the system hardware recovery mechanism:
disable sys-hardware-recovery polling
History
This command was first available in ExtremeWare 7.5.
Platform Availability
This command is available only on "i" series platforms.
ExtremeWare 7.7 Command Reference Guide
751
Advertisement
Table of Contents
