Show Stacking Port - Extreme Networks ExtremeWare Command Reference Manual

Stacking Commands

show stacking port

show stacking port <stacking-port-no> [stats | rxerrors | txerror |
utilization | packet]
Description
Displays statistics about the stacking port on the current switch.
Syntax Description
stacking-port-no Specifies the stacking port number of the current switch. For a list of stacking port numbers
by switch model, see Table 27 on page 1448.
stats Specifies to display port statistics for the stacking port.
rxerrors Specifies to display real-time receive error statistics.
txerrors Specifies to display real-time transmission error statistics.
utilization Specifies to display port utilization.
packet Specifies to display a histogram of packet statistics.
Default
N/A
Usage Guidelines
If only a stacking port is specified, the switch displays all the information available for the port.
Example
The following command displays port utilization statistics for a Summit 400-48t:
show stacking port 1:53 utilization
History
This command was first available in ExtremeWare 7.4.
Platform Availability
This command is only available on the Summit 200, Summit 300-24, and Summit 400 switches.
1452 ExtremeWare 7.7 Command Reference Guide