Disable Netlogin Ports - Extreme Networks ExtremeWare Command Reference Manual

Security Commands

disable netlogin ports

disable netlogin ports <portlist> vlan <vlan name>
Description
Disables network login on a specified port in a VLAN.
Syntax Description
portlist Specifies the ports for which netlogin should be disabled.
vlan name Specifies the VLAN on whose ports netlogin should be disabled.
Default
N/A
Usage Guidelines
Network login must be disabled on a port before you can delete a VLAN that contains that port.
This command applies to both the web-based and 802.1x mode of network login. To control which
authentication mode is used by network login, use the following commands:
enable netlogin [web-based | dot1x]
disable netlogin [web-based | dot1x]
Example
The following command disables network login on port 9 in the VLAN called corp:
disable netlogin ports 9 vlan corp
History
This command was first available in ExtremeWare 6.2.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
1002 ExtremeWare 7.7 Command Reference Guide