Configure Tacacs-Accounting Timeout - Extreme Networks ExtremeWare Command Reference Manual

Security Commands

configure tacacs-accounting timeout

configure tacacs-accounting {[primary | secondary] {server [<ipaddress>] |
<hostname>}} timeout <seconds>
Description
Configures the timeout interval for TACACS+ accounting authentication requests.
Syntax Description
primary Configures the timeout for the primary TACACS+ accounting server.
secondary Configures the timeout for the secondary TACACS+ accounting server.
ipaddress Specifies the IP address of the TACACS+ server being configured.
hostname Specifies the host name of the TACACS+ server being configured.
seconds Specifies the number of seconds to wait before retrying accounting requests. Range is 3 to 120
seconds
Default
The default is 3 seconds.
Usage Guidelines
This command configures the timeout interval for TACACS+ accounting authentication requests. When
the timeout has expired, another authentication attempt is made to the next alternative TACACS+
accounting server.
Examples
On an "i" series switch, the following command configures the timeout interval for TACACS+
accounting authentication to 10 seconds:
configure tacacs-accounting timeout 10
On an "e" series switch, the following command configures the timeout interval for TACACS+
accounting authentication to 10 seconds:
configure tacacs-accounting primary server 192.168.12.12 timeout 10
History
This command was first available in ExtremeWare 7.0.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
948 ExtremeWare 7.7 Command Reference Guide