Enable Arp-Learning Vlan Ports - Extreme Networks ExtremeWare Command Reference Manual

enable arp-learning vlan ports

enable arp-learning vlan <vlan name> port <portlist>
From ExtremeWare 7.7, this command is modified to:
enable ip-security arp learning learn-from-arp vlan <vlan name> ports
<portlist>
Description
Enables the ARP-learning feature on a port in the specified VLAN.
Syntax Description
vlan name
portlist
Default
By default, ARP learning is enabled.
Usage Guidelines
None
Example
N/A
History
This command was first available in ExtremeWare 7.3.0. and ExtremeWare 7.3e.
This command is modifed in ExtremeWare 7.7.0. The new command is:
enable ip-security arp learning learn-from-arp vlan <vlan name> ports
<portlist>
Both the commands can be used in ExtremeWare 7.7.0.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.7 Command Reference Guide
Specifies the vlan to which the rule applies.
Specifies the ports to which the rule applies.
all specifies that the rule will be applied to all ports.
enable arp-learning vlan ports
1023