Show Wireless Ports Interface Client-History Configuration - Extreme Networks ExtremeWare Command Reference Manual

show wireless ports interface client-history configuration

show wireless ports [<portlist> | all] interface [1 | 2] client-history
configuration
Description
Displays the current configuration of the client history and diagnostic features.
Syntax Description
portlist Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the form
1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
all Specifies all active ports.
interface Specifies an interface: 1 or 2.
Default
N/A
Usage Guidelines
Use this command to see the current configuration of the client-history feature for the specified wireless
port and interface.
Example
The following example displays the client history and diagnostic features on port 1:25 and interface 1:
show wireless ports 1:25 interface 1 client-history configuration
The output of the command is similar to:
Intf Enabled
----------------------------------------------------------------
1:25:1 Y
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
ExtremeWare 7.7 Command Reference Guide
TableSize Timeout
128 600
show wireless ports interface client-history configuration
1405