Unconfigure Netlogin Agingtime - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

Security Commands

unconfigure netlogin agingtime

This command sets the network login aging time to the default value.

Syntax Description

This command does not have a syntax.

The default is 5 minutes

Usage Guidelines

Use this command to set the network login aging time out.

The following example sets the network login aging time to the default value:

unconfigure netlogin agingtime

This command was first available in ExtremeWare 7.7.

Platform Availability

This command is available on all platforms.

ExtremeWare 7.7 Command Reference Guide

Do you have a question about the ExtremeWare and is the answer not in the manual?

Extremeware 7.7