configure stpd ports link-type
Example
The following command configures ports 1 through 4 to be point-to-point links in STPD s1 on a
stand-alone switch:
configure stpd s1 ports link-type point-to-point 1-4
The following command configures slot 2, ports 1 through 4 to be point-to-point links in STPD s1 on a
modular switch:
configure stpd s1 ports link-type point-to-point 2:1-2:4
History
This command was first available in ExtremeWare 7.1.
This command was added to the Summit "e" series of switches in ExtremeWare 6.2a and ExtremeWare
7.1e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.7 Command Reference Guide
1595