Configure Wireless Default-Gateway - Extreme Networks ExtremeWare Command Reference Manual

configure wireless default-gateway

configure wireless default-gateway <ip_address>
Description
Configures the default gateway IP address.
Syntax Description
ip_address
Default
0.0.0.0.
Usage Guidelines
The wireless default gateway IP address is usually set to the wireless management VLAN address. This
address is used by all wireless client traffic whose destination is upstream switches.
Example
The following example configures the switch level property for the default gateway:
configure wireless default-gateway 192.168.1.1
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
ExtremeWare 7.7 Command Reference Guide
Indicates the IP address of the default gateway. By default, this is the same IP address as the
management VLAN.
configure wireless default-gateway
1309