Extreme Networks ExtremeWare Command Reference Manual page 1625

The output for this command is as follows:
------------------------------------------------
------------------------------------------------
MSTP Region
Format Identifier
Revision Level
Common Instance Spanning Tree (CIST)
Total Number of MST Instances (MSTI)
------------------------------------------------
------------------------------------------------
Name
s0
cist_stp
Total number of STPDs: 2
The following command displays STPD settings on an STPD named Backbone_st in an Alpine 3804
switch:
show stpd backbone_st
The results for this command are as follows:
Stpd: Backbone_st Stp: ENABLED
Rapid Root Failover: Disabled
Operational Mode: 802.1W
802.1Q Tag: (none)
Ports:2:5,2:6,3:1,3:2,3:3,3:4,3:5,3:6,3:7,3:8,4:1,4:2
4:3,4:4
Active Vlans:
Bridge Priority: 32768
BridgeID:
Designated root:
RootPathCost: 0
MaxAge: 20s
CfgBrMaxAge: 20s
Topology Change Time: 35s
Topology Change Detected: FALSE
Number of Topology Changes: 0
Time Since Last Topology Change: 5192295s
The following command displays STPD settings on an STPD named Backbone_st in a Summit 200 switch:
show stpd backbone_st
The results for this command are as follows:
* Summit200:47 # show stpd Backbone_st
Stpd: Backbone_st Stp: ENABLED
Rapid Root Failover: Disabled
Operational Mode: 802.1W
802.1Q Tag: (none)
Ports:2:5,2:6,3:1,3:2,3:3,3:4,3:5,3:6,3:7,3:8,4:1,4:2
ExtremeWare 7.7 Command Reference Guide
MSTP Global Configuration
STP Domain Configuration Table
Tag Flags Ports Bridge ID
0000 D----- 24 80000004961f8828 0000000000000000 -------
0000 EM---- 2 80000004961f8828 0000000000000000 -------
Default
80:00:00:01:30:23:c1:00
80:00:00:01:30:23:c1:00
Root Port: ----
HelloTime: 2s
CfgBrHelloTime: 2s
: "0004961f8828"
: 0
: 3
: "cist_stp"
: 0
Designated Root
Number of Ports: 0
ForwardDelay: 15s
CfgBrForwardDelay: 15s
Hold time: 1s
Topology Change: FALSE
Number of Ports: 14
show stpd
Rt Port Rt Cost
0
0
1625