Unconfigure Eaps Port - Extreme Networks ExtremeWare Command Reference Manual

unconfigure eaps port

unconfigure eaps <name> [primary | secondary] port
Description
Sets the specified port's internal configuration state to INVALID.
Syntax Description
name Specifies the name of an EAPS domain.
primary Specifies that the primary port should be unconfigured.
secondary Specifies that the secondary port should be unconfigured.
Default
N/A
Usage Guidelines
Unconfiguring an EAPS port sets its internal configuration state to INVALID, which causes the port to
appear in the Idle state with a port status of Unknown when you use the
to display the status information about the port.
Example
The following command unconfigures this node's EAPS primary ring port on the domain eaps_1:
unconfig eaps eaps_1 primary port
History
This command was first available in ExtremeWare 6.2.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.7 Command Reference Guide
unconfigure eaps port
command
show eaps detail
1487