Wireless Commands
enable wireless ports interface client-scan
enable wireless ports [<portlist> | all] interface [1 | 2] client-scan
Description
Enables the client scan feature on the specified wireless interface.
Syntax Description
portlist
Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the
form 1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
all
Specifies all ports.
interface
Specifies an interface: 1 or 2.
Default
N/A
Usage Guidelines
Use this command to enable the client scan feature on the specified wireless interface.
Example
The following command enables port 1:31 and interface 2:
enable wireless ports 1:31 interface 2 client-scan
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
1368
ExtremeWare 7.7 Command Reference Guide