Wireless Commands
disable wireless ports interface ap-scan
disable wireless ports <portlist> interface [1 |2] ap-scan
Description
Stops an on-channel wireless port scan for the indicated port or ports and interface for the Altitude 300.
Syntax Description
portlist
Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the form
1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
interface
Specifies an interface: 1 or 2.
Default
N/A
Usage Guidelines
When the scan feature is disabled, entries slowly age out of the scan results table until it is empty. If the
scan is restarted, the table values from the previous scan will be kept.
Example
The following command disables interface 2 on ports 1:18 to 1:28 on a Summit 300-48:
disable wireless ports 1:18-1:28 interface 2 ap-scan
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
1354
ExtremeWare 7.7 Command Reference Guide