configure wireless ports interface ap-scan off-channel
max-wait
configure wireless ports [<portlist> | all] interface [1 | 2] ap-scan
off-channel max-wait <num>
Description
Use this command to set the maximum time an off-channel scan waits at a particular channel.
Syntax Description
portlist
Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the form
1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
all
Specifies all ports.
interface
Specifies an interface: 1 or 2.
num
Specifies the wait time in milliseconds. Valid entries are between 10 and 10000 milliseconds.
Default
600 ms.
Usage Guidelines
Use this command to specify the time that the access point (AP) should wait on a particular channel.
Example
The following command sets the wait time at 5 milliseconds:
configure wireless ports 1:5 interface 2 ap-scan off-channel max-wait 5
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
ExtremeWare 7.7 Command Reference Guide
configure wireless ports interface ap-scan off-channel max-wait
1319