Configure Netlogin Redirect-Page - Extreme Networks ExtremeWare Command Reference Manual

Security Commands

configure netlogin redirect-page

configure netlogin redirect-page <url>
Description
Configures the redirect URL for network login.
Syntax Description
url Specifies the redirect URL for network login.
Default
The redirect URL default value is "http://www.extremenetworks.com".
Usage Guidelines
In ISP mode, you can configure network login to be redirected to a base page after successful login
using this command. If a RADIUS server is used for authentication, then base page redirection
configured on the RADIUS server takes priority over this configuration.
You must configure a complete URL starting from either http:// or https://
This command applies only to the web-based authentication mode of network login.
Example
The following example configures the redirect URL as :
http://www.extremenetworks.com
configure netlogin redirect-page http://www.extremenetworks.com
History
This command was first available in ExtremeWare 7.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
894 ExtremeWare 7.7 Command Reference Guide