Show Wireless Ports Interface Status - Extreme Networks ExtremeWare Command Reference Manual

show wireless ports interface status

show wireless ports [<portlist> | all] interface [1 |2] status
Description
Displays the current state of the selected port and interface.
Syntax Description
portlist Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the form
1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
all Specifies all active ports.
interface Specifies an interface: 1 or 2.
Default
N/A
Usage Guidelines
Use this command to examine RF profiles on a per wireless port basis. This command allows you to
view the log of a specific port or ports, filtering out the switch log.
Examples
The following example displays the status for wireless ports 3 on interface 1:
show wireless ports 3 interface 1 status
The output of the command is similar to:
Intf St. Tx Rate Power
-------------------------------------------------------------------------------
3:1 EN
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
ExtremeWare 7.7 Command Reference Guide
Ch
54 FULL 52
ESS Max Cl. Last State Change
fz-wpa-psk-aes 100
show wireless ports interface status
Mon Jul 26 17:15:11 2004
1431