Configure Sflow Sample-Rate - Extreme Networks ExtremeWare Command Reference Manual
Version 7.7
Hide thumbs
Also See for ExtremeWare:
- Command reference manual (2546 pages) ,
- Command reference manual (2254 pages) ,
- Command reference manual (1598 pages)
Table of Contents
Advertisement
Commands for Status Monitoring and Statistics
configure sflow sample-rate
configure sflow sample-rate <number>
Description
Configures the sample rate at which the sFlow agent collects network traffic samples.
NOTE
This command is available only on the "i" series switches.
Syntax Description
number
Specifies the fraction (1/number) of packets to be sampled.
Default
8192
Usage Guidelines
This command configures the rate at which the sFlow agent collects network traffic samples. One
sample per
of packets received is sent to the sFlow collector. If the sample rate is set to "0"
<number>
(zero), no samples are sent to the collector.
Example
The following command sets the sample rate to one packet out of every 10000:
configure sflow sample-rate 10000
History
This command was first available in ExtremeWare 7.3.0.
Platform Availability
This command is available only on the "i" series platforms.
712
ExtremeWare 7.7 Command Reference Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the ExtremeWare and is the answer not in the manual?
Questions and answers