Extreme Networks ExtremeWare Command Reference Manual page 1420

Wireless Commands
Fields Description
RSS Received signal strength
Example
The following command displays information about client MAC address 00:09:5B:A1:1F:8F on port 1:
show wireless ports 1 interface 1 clients 00:09:5B:A1:1F:8F detail
The output of the command is similar to:
Client MAC : 00:09:5B:A1:1F:8F
Wireless Port : 1:1
Current State : FORWARD
Last State Change : 4:42:39
Authentication Type : PSK
Encryption Type : AES
ESS ID : fz-wpa-psk-aes
Client VLAN : SKSPVlan
Client Priority : 0
Received Signal Strength : 195
TX Frames : 17067
RX Frames : 34228
TX Bytes : 1712753
RX Bytes : 3857802
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
1420 ExtremeWare 7.7 Command Reference Guide