Configure Reboot-Loop-Protection Backup-Msm - Extreme Networks ExtremeWare Command Reference Manual

Troubleshooting Commands

configure reboot-loop-protection backup-msm

configure reboot-loop-protection backup-msm threshold <time-interval>
<count>
Description
Configures reboot loop protection and the number of times slave MSM can reboot within the configured
time limit.
Syntax Description
time-interval The length of time during which the switch can reboot the specified count before entering minimal
mode. The range is 0 - 255 minutes.
count The number of reboots within the specified time-interval. The range is 1 - 7.
Default
If you enter a
time-interval
Usage Guidelines
Specifying a time interval of 0 disables reboot loop protection. Specifying any other value enables it. To
view the current settings, use the
If you reboot the switch manually or use the
time interval and count are both reset to 0.
Example
The following command configures the time interval to 5 minutes and the count to 4:
configure reboot-loop-protection backup-msm threshold 5 4
History
This command was first available in ExtremeWare 7.7.
Platform Availability
This command is available on Black Diamond switches.
1242
but not a , the default
count
or
show switch show configuration
run msm-failover
is 3.
count
commands.
or
run diagnostics
commands, the
ExtremeWare 7.7 Command Reference Guide