Security Commands
configure auth mgmt-access radius-accounting
configure auth mgmt-access radius-accounting primary
<hostname>] {secondary {<ipaddress> | <hostname>]}
Description
Configures RADIUS accounting servers for accounting management sessions.
Syntax Description
ipaddress
Specifies the IP addresses of the primary or secondary accounting server.
hostname
Specifies the host name of the authentication server.
Default
N/A
Usage Guidelines
The RADIUS server must be configured before this command is used. The command fails if the given
primary and secondary RADIUS servers are not configured or if RADIUS authentication is not
configured for management sessions.
Example
The following example shows the configuration of primary and secondary RADIUS servers with the
specified IP addresses.
configure auth mgmt-access radius-accounting primary 192.168.14.12 secondary
192.168.14.55
History
This command was first available in ExtremeWare 7.3.0.
Platform Availability
This command is available on "i" series platforms only.
860
[<ipaddress> |
ExtremeWare 7.7 Command Reference Guide