Show Wireless Ports Interface Client-Scan Configuration - Extreme Networks ExtremeWare Command Reference Manual

Wireless Commands

show wireless ports interface client-scan configuration

show wireless ports [<portlist> | all] interface [1 | 2] client-scan
configuration
Description
Displays the current configuration of the client scan feature.
Syntax Description
portlist Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the
form 1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
all Specifies all active ports.
interface Specifies an interface: 1 or 2.
Default
N/A
Usage Guidelines
Displays the current configuration of the client scan feature, including:
Port: The port number used in the scan
Interface 1 or 2
Enabled: Y (yes) N (no)
Send Added: on | off
Send Removed: on | off
Timeout: Parameter specified for scan timeouts
Max Size: Parameter specified for the number of entries for the table
Examples
The following example displays the current configuration of the client scan feature on port 1:5 and
interface 1:
show wireless ports 1:5 interface 1 client-scan configuration
It produces output similar to the following:
Summit300-48:15 # show wireless ports all interface 1 client-scan configuration
Intf Enabled Send-Added
-------------------------------------------------------------------------------
1:5:1 N off
1412
Send-Removed Timeout
off 600
Max-Size
128
ExtremeWare 7.7 Command Reference Guide