Configure Access-Profile Add - Extreme Networks ExtremeWare Command Reference Manual

configure access-profile add

For the "i" series switches:
configure access-profile <access profile> add {<seq_number>} {permit |
deny} [ipaddress <ip address> <mask> {exact} | as-path <path-expression> |
bgp-community [internet | no-export | no-advertise | no-export-subconfed |
<as_no:number> | number <community>] | ipxnet <netid> <netid mask> | ipxsap
<sap_type> <service_name> | vlan]
For the "e" series switches:
configure access-profile <access profile> add {<seq_number>} {permit |
deny} [ipaddress <ip address> <mask> {exact} | as-path <path-expression> |
vlan]
Description
Adds an entry to the access profile.
Syntax Description
access profile
seq-number
permit
deny
ip address/mask
exact
path-expression
internet
no-export
no-advertise
no-export-subconfed
as_no:number
community
ExtremeWare 7.7 Command Reference Guide
Specifies an access profile name.
Specifies the order of the entry within the access profile. If no sequence number is
specified, the new entry is added to the end of the access-profile and is automatically
assigned a value of 5 more than the sequence number of the last entry.
Per-entry permit specification. The per-entry attribute takes effect only if the
access-profile mode is none. Otherwise, the overall access profile type takes
precedence.
Per-entry deny specification. The per-entry attribute takes effect only if the access-profile
mode is none. Otherwise, the overall access profile type takes precedence.
Specifies an IP address and mask as an entry in the profile list.
Specifies that an exact match with address and mask will be performed. Subnets within
the address range will not match entry against entry.
Specifies a regular expression string to match against the autonomous system path.
Specifies a match against all routes, because all routes belong to the internet
community.
NOTE: This option is available only on "i" series switches.
Match against communities with the no-export attribute.
NOTE: This option is available only on "i" series switches.
Match against communities with the no-advertise attribute.
NOTE: This option is available only on "i" series switches.
Match against communities with the no-export-subconfed attribute.
NOTE: This option is available only on "i" series switches.
Match against a BGP community number, specified in as_no:number format.
NOTE: This option is available only on "i" series switches.
Match against a BGP community number specified as an unsigned 32-bit integer in
decimal format.
NOTE: This option is available only on "i" series switches.
configure access-profile add
851