IP Unicast Commands
configure iparp delete
configure iparp delete <ip address>
Description
Deletes an entry from the ARP table. Specify the IP address of the entry.
Syntax Description
ip address
Specifies an IP address.
Default
N/A
Usage Guidelines
Removes any IP ARP entry (dynamic or permanent) from the table. The
is used to match
ip address
the IP interface address to locate a suitable interface.
Example
The following command deletes an IP address entry from the ARP table:
configure iparp delete 10.1.2.5
History
This command was available in ExtremeWare 2.0.
This command was added to the "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
1666
ExtremeWare 7.7 Command Reference Guide
Need help?
Do you have a question about the ExtremeWare and is the answer not in the manual?