Configure Wireless Ports Interface Max-Clients - Extreme Networks ExtremeWare Command Reference Manual

configure wireless ports interface max-clients

configure wireless ports [<portlist> | all] interface [1 | 2] max-clients
<value>
Description
Sets the maximum number of clients that can connect simultaneously to a wireless interface.
Syntax Description
portlist Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the form
1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
all Specifies all ports.
interface Specifies an interface: 1 or 2.
value Specifies the maximum number of clients that are allowed to connect simultaneously. Valid values are
from 0 to 128. The default value is 100.
Default
100
Usage Guidelines
Use this command to limit the number of clients that can connect on any interface: 1 or 2.
Example
The following example sets the maximum client level to 72 for port 15 and interface 1:
configure wireless ports 15 interface 1 max-clients 72
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
ExtremeWare 7.7 Command Reference Guide
configure wireless ports interface max-clients
1335