Extreme Networks ExtremeWare Command Reference Manual page 1602
Version 7.7
Hide thumbs
Also See for ExtremeWare:
- Command reference manual (2546 pages) ,
- Command reference manual (2254 pages) ,
- Command reference manual (1598 pages)
Table of Contents
Advertisement
STP Commands
The following command assigns a priority of 1 to slot 2, ports 1 through 5 in STPD s0 on a modular
switch:
configure stpd s0 ports priority 1 2:1-2:5
History
This command was first available in ExtremeWare 2.0.
This command was modified in ExtremeWare 4.0 to support modular switches.
This command was modified in ExtremeWare 6.1 to update the
parameter.
priority
This command was added to the Summit "e" series of switches in ExtremeWare 6.2a and ExtremeWare
7.1e.
Platform Availability
This command is available on all platforms.
1602
ExtremeWare 7.7 Command Reference Guide
Advertisement
Table of Contents
Related Manuals for Extreme Networks ExtremeWare
Related Products for Extreme Networks ExtremeWare
- Extreme Networks ExtremeWare XOS Command
- Extreme Networks ExtremeWare Enterprise Manager
- Extreme Networks EPICenter Guide
- Extreme Networks ExtremeXOS ScreenPlay
- Extreme Networks ExtremeWireless AP460i
- Extreme Networks ExtremeWireless AP460e
- Extreme Networks ExtremeSwitching Virtual Services Platform 4450GSX-DC
- Extreme Networks ExtremeSwitching 3600 Series
- Extreme Networks ExtremeSwitching ISW Series
- Extreme Networks ExtremeSwitching X440-G2-12t-10GE4
- Extreme Networks ExtremeSwitching X440-G2-12p-10GE4
- Extreme Networks ExtremeSwitching X440-G2-48t-10GE4
- Extreme Networks ExtremeSwitching X440-G2-12t8fx-GE4
- Extreme Networks ExtremeSwitching X450-G2-48t-10GE4
- Extreme Networks ExtremeSwitching X620-10x
- Extreme Networks ExtremeCloud NMS-A-25
Need help?
Do you have a question about the ExtremeWare and is the answer not in the manual?