Configure Wireless Ports Interface Client-Scan Added-Trap - Extreme Networks ExtremeWare Command Reference Manual

configure wireless ports interface client-scan added-trap

configure wireless ports [<portlist> | all] interface [1 | 2] client-scan
added-trap [on |off]
Description
Enables or disables traps from the client-scan feature when a new client is detected.
Syntax Description
portlist Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the form
1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
all Specifies all ports.
interface Specifies an interface: 1 or 2.
on Enables traps when a new client is detected.
off Disables traps when a new client is detected.
Default
Off
Usage Guidelines
Enabling traps can saturate management stations if an area is heavily populated.
Example
The following command enables traps for port 1:5 and interface 2:
configure wireless port 1:5 interface 2 client-scan added-trap on
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
ExtremeWare 7.7 Command Reference Guide
configure wireless ports interface client-scan added-trap
1331