Configure Rf-Profile Beacon-Interval - Extreme Networks ExtremeWare Command Reference Manual

Wireless Commands

configure rf-profile beacon-interval

configure rf-profile <name> beacon-interval <value>
Description
Specifies the frequency interval of the beacon in milliseconds.
Syntax Description
name Specifies the names of the RF profile.
value Specifies the interval of the beacon in milliseconds. Valid values are from 20 to 1000.
Default
40 ms
Usage Guidelines
A beacon is a packet that has been broadcast by the wireless port to synchronize the wireless network.
The beacon-interval is the time in milliseconds between beacons.
Examples
The following command sets the beacon interval to 100 ms:
configure rf-profile rfprof1 beacon-interval 100
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
1300 ExtremeWare 7.7 Command Reference Guide