Configure Wireless Ports Interface Ap-Scan Results Size - Extreme Networks ExtremeWare Command Reference Manual

configure wireless ports interface ap-scan results size

configure wireless ports [<portlist> | all] interface [1 | 2] ap-scan
results size <num>
Description
Sets the number of elements that the wireless interface stores.
Syntax Description
portlist Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the form
1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
all Specifies all ports.
interface Specifies an interface: 1 or 2.
num Specifies the number of elements that the wireless interface stores. Valid numbers are between 1 and
128.
Default
128
Usage Guidelines
Use this command to specify the size of the results table.
Example
The following command configures port 1:7 and interface 1 to store 100 elements:
configure wireless ports 1:7 interface 1 ap-scan results size 100
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
ExtremeWare 7.7 Command Reference Guide
configure wireless ports interface ap-scan results size
1323