Wireless Commands
reset wireless ports
reset wireless ports <portlist>
Description
Resets the access point connected to the wireless ports.
Syntax Description
portlist
Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the form 1,
2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
Default
N/A
Usage Guidelines
Use this command to reboot the access point connected to the wireless port.
Example
The following example resets all the wireless ports to the default values:
reset wireless ports
The following example resets all the Remote Connect wireless ports on a Summit 300-48t switch to the
default values:
reset wireless ports v:*
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
1372
ExtremeWare 7.7 Command Reference Guide
Need help?
Do you have a question about the ExtremeWare and is the answer not in the manual?