Show Wireless Ports Image-Configuration - Extreme Networks ExtremeWare Command Reference Manual

show wireless ports image-configuration

show wireless ports [all | <portlist>] image-configuration
Description
Displays runtime image configuration for the specified wireless ports. The display includes the TFTP
server name or IP address and the path for the AP runtime image
Syntax Description
all Specifies all active ports.
portlist Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the form
1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
Default
By default, the output for a wireless port is null if a runtime image is not configured.
Usage Guidelines
Use this command to review the runtime image configuration of one or more wireless ports.
Example
The following example displays a report of the runtime image for the configured wireless ports:
show wireless ports all image-configuration
The output of the command is similar to:
Runtime Server:
Runtime Server:
History
This command was first available in ExtremeWare 7.5.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
ExtremeWare 7.7 Command Reference Guide
Port: 1:11
10.255.52.2
Runtime Path: apimages/ART-7_6_3.bin
Port: 1:47
10.255.52.2
Runtime Path: v760b10/ART-7_6_4.bin
show wireless ports image-configuration
1395