Commands for Status Monitoring and Statistics
unconfigure log target format
unconfigure log target [console-display | memory-buffer | nvram | session |
syslog [<host name/ip> {:<udp-port>} [local0 ... local7]]] format
Description
Resets the log target format to its default values.
Syntax Description
console-display
Specifies the console display format.
memory-buffer
Specifies the switch memory buffer format.
nvram
Specifies the switch NVRAM format.
session
Specifies the current session (including console display) format.
syslog
Specifies a syslog target format.
host name/ip
Specifies the syslog host name or IP address.
udp-port
Specifies the UDP port number for the syslog target.
local0 ... local7
Specifies the local syslog facility.
format
Specifies that the format for the target will be reset to the default value.
Default
When a target format is unconfigured, it is reset to the default values.
The following defaults apply to console display, memory buffer, NVRAM, and session targets:
• timestamp—hundredths
• date—mm-dd-yyyy
• severity—on
• event-name—condition
• host-name—off
• priority—off
• tag-id—off
• tag-name—off
• sequence-number—off
• process-name—off
• process-id—off
• source-function—off
• source-line—off
The following defaults apply to syslog targets (per RFC 3164):
• timestamp—seconds
• date—mmm-dd
830
ExtremeWare 7.7 Command Reference Guide