Unconfigure Log Filter - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

unconfigure log filter

unconfigure log filter <filter name>

Resets the log filter to its default values; removes all filter items.

Syntax Description

Specifies the log filter to unconfigure.

Usage Guidelines

If the filter name specified is DefaultFilter, this command restores the configuration of DefaultFilter back

to its original settings.

If the filter name specified is not DefaultFilter, this command sets the filter to have no events configured

and therefore, no incidents will pass. This is the configuration of a newly created filter that was not

copied from an existing one.

command for information about deleting a filter.

delete log filter

The following command sets the log filter myFilter to stop passing any events:

unconfigure log filter myFilter

This command was first available in ExtremeWare 7.1.0.

This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.

Platform Availability

This command is available all platforms.

ExtremeWare 7.7 Command Reference Guide

Do you have a question about the ExtremeWare and is the answer not in the manual?

Extremeware 7.7