configure system-dump timeout
configure system-dump timeout
configure system-dump timeout <seconds>
Description
Configures an optional timeout for the dump transfer.
NOTE
This command is available only on the "i" series switches.
Syntax Description
seconds
Specifies a time in seconds for the system dump timeout.
Default
The default is 0.
Usage Guidelines
The minimum non-zero value is 120 seconds. The minimum recommended value is 480 seconds.
Example
The following command configures the system dump timeout to 600 seconds:
configure system-dump timeout 600
History
This command was first available in ExtremeWare 6.2.2.
Platform Availability
This command is available on platforms with an Ethernet management port.
ExtremeWare 7.7 Command Reference Guide
1245