Unconfigure Stacking Requested-Slot - Extreme Networks ExtremeWare Command Reference Manual

Stacking Commands

unconfigure stacking requested-slot

unconfigure stacking requested-slot [current-slot <slot number>]
Description
Removes previous configurations for a specific slot number in the stack.
Syntax Description
current-slot <slot number>
Default
The current slot (switch).
Usage Guidelines
Use this command to remove a particular slot number assignment for a stack member. The
configuration marks the slot ID as invalid. The next time the member joins the stack the stack manager
assigns a new slot number.
Example
The following command removes previous requests for a specific slot ID:
unconfigure stacking requested-slot current-slot 5
History
This command was first available in ExtremeWare 7.4.
Platform Availability
This command is only available on the Summit 200, Summit 300-24, and Summit 400 switches.
1454
Specifies the member's slot ID that is applicable for this request. If this option is
not given, the command applies to the member on which it is run.
ExtremeWare 7.7 Command Reference Guide