Configure Cpu-Dos-Protect Timeouts - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

Security Commands

configure cpu-dos-protect timeouts

configure cpu-dos-protect timeouts <seconds>

Configures the number of seconds prior to timeout for denial of services.

Syntax Description

Specifies the number of seconds before a timeout takes place.

Usage Guidelines

When heavy traffic reaches the alert threshold, a hardware ACL is created that blocks the traffic for the

timeout number of seconds.

The following command configures timeout of 10 seconds:

configure cpu-dos-protect timeouts 10

This command was first available in ExtremeWare 6.2.2.

The filter-type-allowed keyword was added in ExtremeWare 7.0.0.

This command was added to the Summit "e" series of switches in ExtremeWare 7.3e.

Platform Availability

This command is available on all platforms.

ExtremeWare 7.7 Command Reference Guide

Do you have a question about the ExtremeWare and is the answer not in the manual?

Extremeware 7.7