Show Wireless Ports Interface Ap-Scan Results Mac-Address - Extreme Networks ExtremeWare Command Reference Manual

show wireless ports interface ap-scan results
mac-address
show wireless ports [all | <portlist>] interface [1 | 2] ap-scan results
<mac-address>
Description
Displays information about an access point (AP) whose MAC address is selected from the AP scan
results table.
portlist
all
interface
mac-address
Default
N/A
Usage Guidelines
Use this command to get information about an AP using its MAC address.
Example
The following example display information about an AP by MAC address:
show wireless ports 1:8 interface 2 ap-scan results 00:04:96:5:80:B0:
The output of the command is similar to:
AP Mac Address
================================================================================
00:04:96:05:80:B0 1:8:2
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
ExtremeWare 7.7 Command Reference Guide
Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the
form 1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
Specifies all active ports.
Specifies an interface: 1 or 2.
Specifies the MAC address selected from the AP scan results table.
Intf ESS Name
Extreme_g

show wireless ports interface ap-scan results mac-address

AvgRSS Type Chan WEP WPA Last
8 bss 11 Y 23:53:34
1401