Configure Mstp Revision - Extreme Networks ExtremeWare Command Reference Manual

STP Commands

configure mstp revision

configure mstp revision <revision>
Description
Configures the revision number of the MSTP region.
Syntax Description
revision This parameter is reserved for future use.
Default
The default value of the revision level is 3.
Usage Guidelines
Although this command is displayed in the CLI, it is reserved for future use. Please do not use this
command.
If you accidentally configure this command, remember that each switch in the region must have the
same MSTP configuration attributes, also known as MSTP region identifiers. These identifiers consist of
the following:
• Region Name—The name of the MSTP region.
• Format Selector—The number used to identify the format of MSTP BPDUs. The default is 0.
• Revision Level—This identifier is reserved for future use; however, the switch uses and displays a
default of 3.
Example
The following command returns the MSTP revision number to 3, the default revision number:
configure mstp revision 3
History
This command was first available in ExtremeWare 7.6.
Platform Availability
This command is available on all platforms.
1582 ExtremeWare 7.7 Command Reference Guide