Enable Wireless Ports Interface Client-History - Extreme Networks ExtremeWare Command Reference Manual

enable wireless ports interface client-history

enable wireless ports [<portlist> | all] interface [1 | 2] client-history
Description
Sets the Altitude 300 to log client historical information.
Syntax Description
portlist Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the
form 1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
all Specifies all ports.
interface Specifies an interface: 1 or 2.
Default
Disable
Usage Guidelines
Use this command to get the detail status about each associated client.
Example
The following example sets port 1:23 and interface 1 to keep historical information:
enable wireless ports 1:23 interface 1 client-history
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
ExtremeWare 7.7 Command Reference Guide
enable wireless ports interface client-history
1367