Configure Wireless Ports Interface Client-Scan Results Size - Extreme Networks ExtremeWare Command Reference Manual

configure wireless ports interface client-scan results size

configure wireless ports [<portlist> | all] interface [1 | 2] client-scan
results size <value>
Description
Configures the maximum number of entries in the client scan information table.
Syntax Description
portlist Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the form
1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
all Specifies all ports.
interface Specifies an interface: 1 or 2.
value Specifies the maximum number of entries in the client scan information table. The default value is 128.
(Range is unlimited.)
Default
128
Usage Guidelines
Use this command to specify the maximum number of entries that the client-history table can store.
Example
The following command configures the maximum number of entries in the client scan table as 1000 for
port 1:5 and interface 2:
configure wireless port 1:5 interface 2 client-scan results size 1000
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
ExtremeWare 7.7 Command Reference Guide
configure wireless ports interface client-scan results size
1333