Commands for Status Monitoring and Statistics
clear log diag error
clear log diag error <slot number>
Description
Clears the Alpine diagnostics failures from the NVRAM.
NOTE
This command is supported only on the Alpine switches.
Syntax Description
slot number
Specifies the slot where the I/O module is installed.
Default
N/A
Usage Guidelines
Use this command only at the direction of Extreme Networks personnel. Extreme Networks support
personnel can clear the Alpine diagnostics failures from the NVRAM using the following command:
clear log diag error <slot number>
Example
The following command clears the Alpine diagnostics failures from the NVRAM for the module in
slot 4:
clear log diag remap 4
History
This command was first available in ExtremeWare 7.2.0b25.
Platform Availability
This command is available only on the Alpine switches.
670
ExtremeWare 7.7 Command Reference Guide