Show Slb Pool - Extreme Networks ExtremeWare Command Reference Manual

show slb pool

show slb pool <pool name>
Description
Displays the current SLB pool configuration and status.
Syntax Description
pool name
Default
N/A
Usage Guidelines
If you do not specify a pool, configuration and status for all pools is displayed.
Example
The following command displays the current pool configuration and statistics for all pools, currently
"rr_pool" and "ratio_pool":
show slb pool
Following is the output from this command:
Name
IP
---------------------------------------------------------------------
rr_pool
1.111.1.1
1.111.1.2
1.111.1.3
ratio_pool
1.111.1.3
1.111.1.2
1.111.1.1
Flags: E - Enable,
P - Health check passed,
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all "i" series platforms.
ExtremeWare 7.7 Command Reference Guide
Specifies a pool.
IP
Flags
# VIPs sharing: 1
E--H--
E--H--
E--H--
# VIPs sharing: 1
E--H--
E--H--
E--H--
U - Up, R - IP Route Up,
TCP/UDP
Port Flags
Load Bal. Method: Round Robin
80 E---
80 E---
80 E---
Load Bal. Method: Ratio
80 E--- 3
80 E--- 2
80 E--- 1
H - Health check enabled,
! - VLAN not configured with "slb-type"
show slb pool
Ratio/
Priority
655