Enable Slb Vip Svcdown-Reset - Extreme Networks ExtremeWare Command Reference Manual
Version 7.7
Hide thumbs
Also See for ExtremeWare:
- Command reference manual (2546 pages) ,
- Command reference manual (2254 pages) ,
- Command reference manual (1598 pages)
Table of Contents
Advertisement
SLB Commands—"i" Series Switches Only
enable slb vip svcdown-reset
enable slb vip [all | <vip name>] svcdown-reset
Description
Enables svcdown-reset.
Syntax Description
all
Specifies all virtual servers.
vip name
Specifies a virtual server.
Default
The svcdown-reset feature is disabled by default.
Usage Guidelines
The svcdown-reset feature configures the switch to send TCP RST packets to both the clients and the
virtual server if the virtual server fails a health-check.
To disable svcdown-reset, use the following command:
disable slb vip svcdown-reset
Example
The following command enables svcdown-reset for the virtual server named ftp_vip:
enable slb vip ftp_vip svcdown-reset
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all "i" series platforms.
638
ExtremeWare 7.7 Command Reference Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the ExtremeWare and is the answer not in the manual?