Default Configuration
The default hello interval is 30 seconds.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan3)#ipv6 pimsm hello-interval 45
ipv6 pimsm join-prune-interval
Use the ipv6 pimsm join-prune-interval command to configure the interface
join/prune interval for the PIM-SM router. Use the "no" form of this
command to set the join/prune interval to the default.
Syntax
ipv6 pimsm join-prune-interval interval
no ipv6 pimsm join-prune-interval
•
interval— The join/prune interval (Range: 0–18000 seconds).
Default Configuration
The default join/prune interval is 60 seconds.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
754
IPv6 Multicast Commands