Redirect-Url; Session-Timeout - Dell PowerConnect 6224 Command Line Interface Manual

User Guidelines
There are no user guidelines for this command.
Example
console(config-CP 2)#redirect

redirect-url

Use the redirect-url command to configure the redirect URL for a captive
portal configuration.
Syntax
url
redirect-url
url —The URL for redirection (Range: 1–512 characters).
•
Default Configuration
There is no redirect URL configured by default.
Command Mode
Captive Portal Instance mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-CP 2)#redirect-url www.dell.com

session-timeout

Use the session-timeout command to configure the session timeout for a
captive portal configuration. Use the "no" form of this command to reset the
session timeout to the default.
Syntax
timeout
session-timeout
1072
Captive Portal Commands