Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the Protocol-Based VLAN information for
either the entire system.
console#show port protocol all
Group
Name
---------------
-------------
test
show switchport protected
Use the show switchport protected command in Privileged EXEC mode to
display the status of all the interfaces, including protected and unprotected
interfaces.
Syntax
show switchport protected
groupid — Identifies which group the port is to be protected in. (Range: 0-
•
2)
Default Configuration
This command has no default configuration.
588
VLAN Commands
Group
ID
Protocol(s
-----
1
groupid
VLAN
----------
IP
Interface(s)
----
-----------
1
1/g1