Show Ip Rip Interface - Dell PowerConnect 6224 Command Line Interface Manual

Host Routes Accept Mode........................
Enable
Global route changes........................... 0
Global queries................................. 0
Default Metric................................. 12
Default Route Advertise........................ 0
Redistributing.................................
Source.........................................
Connected
Metric......................................... 2
Distribute List................................ Not
configured
Redistributing.................................
Source......................................... ospf
Metric......................................... 10
Match Value....................................
'nssa-external 1'
Distribute List................................ Not
configured

show ip rip interface

Use the show ip rip interface command in Privileged EXEC mode to display
information related to a particular RIP interface.
Syntax
vlan-id
show ip rip interface vlan
vlan-id — Valid VLAN ID.
•
Default Configuration
This command has no default configuration.
1027
Routing Information Protocol Commands